Chapter 4 Status Screens
Table 11 Status > Route Info (continued)
LABEL | DESCRIPTION |
Flag | This indicates the route status. |
| Up: The route is up. |
| !(Reject): The route is blocked and will force a route lookup to fail. |
| Gateway: The route uses a gateway to forward traffic. |
| Host: The target of the route is a host. |
| Reinstate: The route is reinstated for dynamic routing. |
| Dynamic (redirect): The route is dynamically installed by a routing daemon |
| or redirect |
| Modified (redirect): The route is modified from a routing daemon or |
| redirect. |
|
|
Metric | The metric represents the "cost of transmission". A router determines the |
| best route for transmission by choosing a path with the lowest "cost". The |
| smaller the number, the lower the "cost". |
|
|
Service | This indicates the name of the service used to forward the route. |
|
|
Interface | This indicates the name of the interface through which the route is |
| forwarded. |
| • br0 indicates the LAN interface. |
| • ptm0 indicates the VDSL WAN interface using IPoE or in bridge mode. |
| • atmx (where x starts from 0 and is the index number of ATM |
| interfaces using different VPI and/or VCI values) indicates the ADSL |
| WAN interface using IPoE, PPPoA or in bridge mode. |
| • pppoax indicates the ADSL WAN interface using PPPoA. |
| • ipoa0 indicates the ADSL WAN interface using IPoA. |
| • pppx (where x starts from 1 and is the index number of PPP |
| connection) indicates the WAN interface using PPPoE. |
| • eth4 indicates the Ethernet WAN interface using IPoE. |
| • 3G indicates the 3G WAN interface. |
|
|
| 91 |
|
|