Chapter 21 Remote Management
Click Advanced > Remote MGMT > SNMP to open the following screen. Use this screen to configure the
Figure 169 SNMP
The following table describes the fields in this screen.
Table 115 SNMP
LABEL | DESCRIPTION |
SNMP Agent | Select Enable to allow a manager station to manage and monitor the |
| |
| Disable. |
|
|
Read Community | Enter the Read Community, which is the password for the incoming |
| Get and GetNext requests from the management station. The default |
| is public and allows all requests. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set |
| requests from the management station. The default is public and |
| allows all requests. |
|
|
System Name | Enter the system name of the |
|
|
System Location | Specify the geographic location of the |
|
|
System Contact | Enter the name of the person in charge of the |
|
|
Trap Manager IP | Type the IP address of the station to send your SNMP traps to. |
|
|
Save/Apply | Click this button to save your changes back to the |
|
|
| 335 |
|
|