ZyXEL Communications P-2812HNU-51c Remote Management, 21.1 Overview, 21.2 The TR-069Screen, 21.1.1What You Can Do in this Chapter

21

Remote Management

21.1 Overview

This chapter explains how to configure the remote management and access control settings on the P-2812HNU-51c.

21.1.1What You Can Do in this Chapter

•The TR-069screen lets you configure the P-2812HNU-51c’s TR-069 auto- configuration settings (Section 21.3 on page 333).

•The TR-064screen lets you enable management via TR-064 on the P- 2812HNU-51c (Section 21.3 on page 333).

•The SNMP screen lets you configure your SNMP settings (Section 21.4 on page 334).

•The Service Control screens let you configure through which interface(s) users can use which service(s) to manage the P-2812HNU-51c (Section 21.5 on page 336).

•The IP Address screens let you configure from which IP address(es) users can use a service to manage the P-2812HNU-51c (Section 21.6 on page 337).

21.2 The TR-069 Screen

TR-069 defines how Customer Premise Equipment (CPE), for example your P- 2812HNU-51c, can be managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup Language (XML) format over HTTP or HTTPS.

An administrator can use an ACS to remotely set up the P-2812HNU-51c, modify settings, perform firmware upgrades as well as monitor and diagnose the P- 2812HNU-51c. You have to enable the device to be managed by the ACS and specify the ACS IP address or domain name and username and password.

	331
P-2812HNU-51c User’s Guide