Chapter 16 Policy Forwarding
The following table describes the labels in this screen.
Table 96 Advanced > Policy Forwarding
LABEL | DESCRIPTION |
Policy Name | This is the name of the rule. |
|
|
SourceIP | This is the source IP address. |
|
|
Protocol | This is the transport layer protocol. |
|
|
SourcePort | This is the source port number. |
|
|
SourceMAC | This is the source MAC address. |
|
|
Interface | This is the WAN interface through which the traffic is routed. |
|
|
Remove | Click the icon to remove a rule from the |
| displays asking you to confirm that you want to delete the rule. |
|
|
Add | Click this to create a new rule. |
|
|
16.2.1 Policy Forwarding Setup
Click the Add button in the Policy Forwarding screen. Use this screen to configure the required information for a policy route.
Figure 153 Policy Forwarding: Add
The following table describes the labels in this screen.
Table 97 Policy Forwarding: Add
LABEL | DESCRIPTION |
Policy Name | Enter a descriptive name of up to 16 printable English keyboard |
| characters, including spaces. |
|
|
Source IP | Enter the source IP address. |
Address |
|
|
|
Protocol | Select the transport layer protocol (TCP or UDP). |
|
|
Source Port | Enter the source port number. |
|
|
Source Mac | Enter the source MAC address. |
Address |
|
|
|
Use Interface | Select a WAN interface through which the traffic is sent. You must have |
| the WAN interface(s) already configured in the WAN screens. |
|
|
298 |
| |
| ||
|
|
|