|
| Chapter 5 WAN Setup |
| Table 20 Internet Connection (continued) | |
| LABEL | DESCRIPTION |
| Rate | This shows the maximum data rate (in Kbps) allowed for traffic sent |
|
| through this connection. This displays N/A when there is no limit on |
|
| transmission rate. |
|
|
|
| Vlan8021p | This indicates the 802.1P priority level assigned to traffic sent through |
|
| this connection. This displays N/A when there is no priority level |
|
| assigned. |
|
|
|
| VlanMuxId | This indicates the VLAN ID number assigned to traffic sent through |
|
| this connection. This displays N/A when there is no VLAN ID number |
|
| assigned. |
|
|
|
| ConnId | This shows the index number of each connection. This displays N/A |
|
| when the interface used by the connection is in Default Mode. |
|
|
|
| IGMP | This shows whether IGMP (Internet Group Multicast Protocol) is |
|
| activated or not for this connection. IGMP is not available when the |
|
| connection uses the bridging service. |
|
|
|
| NAT | This shows whether NAT is activated or not for this connection. NAT is |
|
| not available when the connection uses the bridging service. |
|
|
|
| Firewall | This shows whether the firewall is activated or not for this connection. |
|
| The firewall is not available when the connection uses the bridging |
|
| service. |
|
|
|
| IPv6 | This shows whether IPv6 is activated or not for this connection. IPv6 |
|
| is not available when the connection uses the bridging service. |
|
|
|
| MLD | This shows whether Multicast Listener Discovery (MLD) is activated or |
|
| not for this connection. MLD is not available when the connection uses |
|
| the bridging service. |
|
|
|
| Modify | Click the Edit icon to configure the WAN connection. |
|
| Click the Remove icon to delete the WAN connection. |
|
|
|
| Add | Click Add to create a new connection. |
|
|
|
5.5.1 Internet Connection Configuration
Click the Edit or Add button in the WAN Service screen to configure a WAN connection.
| 107 |
|
|