Chapter 2 Tutorials

3Enter the VPI and VCI values (0 and 33 in this example) for PVC 1.

Select CBR in the Service Category field and set the Peak Cell Rate as 943 (divide the bandwidth 400000 bps by 424). Click Apply/Save to save the changes and go back to the Layer 2 Interface screen.

4Click Add to configure another PVC.

5Enter the VPI and VCI values (0 and 34 in this example) for PVC 2.

Select Non Realtime VBR in the Service Category field. Set the Peak Cell Rate as 1415 (divide the bandwidth 600000 bps by 424) and set both the Sustainable Cell Rate and Maximum Burst Size as 1414 (which is less than the peak cell rate).

 

45

P-2812HNU-51c User’s Guide