Chapter 19 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 105 QoS Class Configuration
LABEL | DESCRIPTION |
Class |
|
Configuration |
|
|
|
Active | Select to enable or disable this classifier. |
|
|
Class Name | Enter a descriptive name of up to 20 printable English keyboard |
| characters, including spaces. |
|
|
Classification | Select an existing number for where you want to put this classifier to |
Order | move the classifier to the number you selected after clicking Apply. |
| Select Last to put this rule in the back of the classifier list. |
|
|
Forward to | Select a WAN interface through which traffic of this class will be |
Interface | forwarded out. If you select Unchange, the |
| traffic of this class according to the default routing table. |
| If traffic of this class comes from a WAN interface and is in a queue |
| that forwards traffic through the LAN/WLAN interface, the P- |
| |
|
|
DSCP Mark | This field is available only when you select the Ether Type check box. |
| If you select Mark, enter a DSCP value with which the |
| 51c replaces the DSCP field in the packets. |
| If you select Auto Mapping and there is a VLAN tag carried in the |
| matched packets, the |
| with the 802.1p priority field. |
| If you select Unchange, the |
| the packets. |
|
|
802.1p Mark | Select a priority level with which the |
| IEEE 802.1p priority field in the packets. |
| If you select Unchange, the |
| field in the packets. |
|
|
VLAN ID Tag | If you select Remark, enter a VLAN ID number (between 1 and 4095) |
| with which the |
| If you select Remove, the |
| frames before forwarding them out. |
| If you select Add, the |
| untagged and add a second VLAN ID. |
| If you select Unchange, the |
| packets. |
|
|
To Queue | Select a queue that applies to this class. |
| You should have configured a queue in the Queue Setup screen |
| already. |
|
|
Criteria Configuration
Use the following fields to configure the criteria for traffic classification.
Basic
316 |
| |
| ||
|
|
|