Chapter 17 DNS Route
17.2.1 DNS Route Edit
Click the Add button in the DNS Route screen. Use this screen to configure the required information for a DNS route.
Figure 156 DNS Route > Add
The following table describes the labels in this screen.
Table 99 DNS Route > Add
LABEL | DESCRIPTION |
Domain Name | Enter the domain name you want to resolve. |
| You can use the wildcard character, an “*” (asterisk) as the left most part |
| of a domain name, such as *.example.com. The |
| forwards DNS queries for any domain name ending in example.com to |
| the WAN interface specified in this route. |
|
|
IP Subnet | Enter the subnet mask for the resolved IP address. |
Mask | The subnet mask specifies the network number portion of an IP address. |
| |
| This is to specify the size of the network number, which determines the |
| maximum number of possible resolved IP addresses for the same domain |
| name. |
|
|
Use Interface | Select a WAN interface through which the matched DNS query is sent. |
| You must have the WAN interface(s) already configured in the WAN |
| screens. |
|
|
Apply | Click this button to save your changes and return to the previous screen. |
|
|
| 303 |
|
|