OREGON® Cordless Tool System |
|
|
|
UNPACKING AND ASSEMBLY |
|
| |
|
| ||
TRIMMER/EDGER MODEL ST250 |
|
| |
|
|
| |
|
|
|
|
UNPACKING and assembly
Unpacking
What’s in the box?
The trimmer/edger requires some assembly before use. These items ship with the trimmer/edger:
• Trimmer/Edger
• Front handle
• Front handle adjustment knob
• Guard with attachment screw
• Instruction manual
• Charger and power cord (if so equipped)
(1)
•Battery (if so equipped)
After removing the trimmer/edger
(1)
from the box, inspect it carefully to ensure no damage has occurred during shipping and that no parts are missing. If any parts are damaged or missing, do not use the trimmer/edger. Contact OREGON® Cordless Tool System to obtain replacement parts at 888.313.8665.
Assembly
Warning: Remove the battery pack from the trimmer/edger before attaching the guard and front handle. A battery operated tool with the battery pack inserted is always on and can start accidentally.
Warning: Do not operate the trimmer/edger without the front handle and guard attached.
Attaching the front handle
The front handle fits on the shaft at a comfortable distance between the rear handle and the trimmer motor housing (Fig. 4).
•Grip the front handle near the clamping point (1).
•Snap the front handle onto the shaft so that the clamp is nearest the rear handle (2).
•Insert the front handle adjustment knob through the hole on the front handle (3) and tighten.
Fig. 4
(1)
(3)
(2)
AE 1212 - F/N 558937 | 13 |