Simplicity H924RX manual Children, Clearing a Clogged Discharge Chute, Emissions

Page 8

en

18.Never direct discharge at bystanders or allow anyone in front of the unit.

19.Never leave a running unit unattended. Always disengage the auger and traction controls, stop engine, and remove keys.

20.Do not operate the unit while under the influence of alcohol or drugs.

21.Keep in mind the operator is responsible for accidents occurring to other people or property.

22.Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment−related injuries. These operators should evaluate their ability to operate the unit safely enough to protect themselves and others from injury.

23.DO NOT wear long scarves or loose clothing that could become entangled in moving parts.

24.Snow can hide obstacles. Make sure to remove all obstacles from the area to be cleared.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the operating activity. Never assume that children will remain where you last saw them.

1.Keep children out of the area and under the watchful care of another responsible adult.

2.Be alert and turn off if children enter the area.

3.Never allow children to operate the unit.

4.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Clearing A Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snowthrowers. Never use your hand to clean out the discharge chute.

To clear the chute:

1.SHUT OFF THE ENGINE.

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean out tool, not your hands.

2.Never store the machine with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snowthrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze−up of the collector/impeller.

6.If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.

7.Always observe safe refueling and fuel handling practices when refueling the unit after transportation or storage.

8.Always follow the engine’s manual instructions for storage preparations before storing the unit for both short and long term periods.

9.Always follow the engine manual instructions for proper start-up procedures when returning the unit to service.

10.Keep nuts and bolts tight and keep equipment in good condition.

11.Never tamper with safety devices. Check their proper operation regularly and make necessary repairs if they are not functioning properly.

12.Components are subject to wear, damage, and deterioration. Frequently check components and replace with manufacturer’s recommended parts, when necessary.

13.Check control operation frequently. Adjust and service as required.

14.Use only factory authorized replacement parts when making repairs.

15.Always comply with factory specifications on all settings and adjustments.

16.Only authorized service locations should be utilized for major service and repair requirements.

17.Never attempt to make major repairs on this unit unless you have been properly trained. Improper service procedures can result in hazardous operation, equipment damage and voiding of manufacturer’s warranty.

Emissions

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or reproductive harm.

2.If available, look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

Service, Maintenance And Storage

Ignition System

1.Check shear bolts (pins) and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

1. This spark ignition system complies with Canadian ICES-002.

1742227

8

Image 8
Contents OPERATOR’S Manual 1742227 Contents Left Right Down 1742227 When Adding Fuel Rules for Safe Operation TrainingPreparation OperationService, Maintenance And Storage Ignition System ChildrenClearing a Clogged Discharge Chute EmissionsAssembly OperationHow To Stop The Snow Thrower How To Throw Snow FigureHow To Use The Wheel Lockout Pin How To Stop The Engine FigureMaintenance Chart MaintenanceHow To Adjust The Height Of The Skids Figure How To Adjust The Scraper Bar FigureHow To Check And Adjust The Cables Lubrication Every 10 Hours FigureHow To Adjust The Belts How To Replace The BeltsHow To Adjust The Belt Guide How To Adjust Or Replace The Friction WheelHow To Order Replacement Parts How To Replace the Auger Shear BoltHow To Prepare The Snow Thrower For Storage Trouble Shooting Chart Table DES Matières SignificationsGauche Droit Haut BAS Avertissement Avertissement Préparation Règles D’UTILISATION Dans DES Conditions DE SécuritéFormation Entretien, maintenance et stockage EnfantsNettoyage d’une chute encrassée Système d’allumageMontage FonctionnementCommande du déversement de la neige Se familiariser avec le chasse−neige FigureArrêt du chasse−neige Figure Avancer et reculer FigureConseils pour l’utilisation du chasse−neige Ou un levier pour retirer neige et débrisTableau DE Maintenance EntretienPièces à ne pas lubrifier Figure Réglage de la hauteur des patins FigureRéglage du bord d’attaque Figure Vérification et réglage des câblesRéglage du guide de courroie Remplacement des courroiesRéglage ou remplacement du disque de friction Préparation du chasse−neige pour le remisage Taille du pneu Distance « a »12 et 13 pouces 10,5 cm 4−1/8 Pouces Sur la plus basse vitesse de la marche avantCommande de pièces détachées Tableau DE DepannageMontage Betrieb Wartungsdiagramm Fehlersuchdiagramm InhaltLinks Rechts Oben Nach Unten Gefahr Warnung Vorbereitung Regeln FÜR DEN Sicheren BetriebÜbung Service, Wartung und Lagerung KinderFreiräumen eines verstopften Auswurfkanal AbgaseBetrieb Über die Schneefräse Abb Kontrollieren des SchneeauswurfsAnhalten der Schneefräse Abb Vorwärts- und Rückwärtsfahren AbbSchnee und Geröll vom Räumwerk entfernen Tips für das SchneefräsenWartungsdiagramm WartungObjekte, die nicht geschmiert werden Abb Einstellung der Kufenhöhe AbbEinstellung der Streichstange Abb Überprüfen und Einstellen der KabelEinstellen bzw. Auswechseln des Reibrads Auswechseln der RiemenEinstellung der Riemenführung Bestellen von Ersatzteilen Auswechseln des SchneckenscherbolzensVorbereitung der Schneefräse auf die Lagerung Fehlersuchdiagramm Indice Montaggio USO Tabella DI Manutenzione1742227 Pericolo Avvertenza Regole PER UN Funzionamento Sicuro AddestramentoPreparazione ConduzioneBambini Pulizia di uno scarico a gravità ostruitoManutenzione, assistenza e conservazione EmissioniMontaggio USOInterruzione delle operazioni dello spazzaneve Figura Lancio di neve FiguraPrima di accendere il motore Spegnimento del motore FiguraSe possibile, scaricare la neve sottovento Suggerimenti per spazzare la neveAvviamento di un motore caldo Figura Tabella DI Manutenzione ManutenzioneParti che non devono essere lubrificate Figura Regolazione della barra raschiatrice FiguraControllo e regolazione dei cavi Regolazione delle cinghieSostituzione delle cinghie Rimozione della cinghia di azionamento della trivellaRegolazione della guida della cinghia Regolazione o sostituzione della ruota di frizioneOrdinazione di parti di ricambio Sostituzione dei bulloni di sicurezza della trivellaPreparazione dello spazzaneve per il rimessaggio Tabella PER LA Soluzione DEI Problemi Innhold Koble til elektrisitetsledning1742227 Fare 1742227 Regler for Sikker Bruk OpplæringForberedelse BrukService, vedlikehold og lagring BarnRengjøre en tilstoppet utkastingssjakt UtslippMontering BrukHvordan stoppe snøfreseren Figur Hvordan frese snø FigurFør du starter motoren Hvordan stanse motoren FigurSnøfresingstips VedlikeholdstabellHvordan fjerne snø eller rester fra naverhuset Vedlikehold Hvordan justere beltelederen Hvordan justere belteneHvordan skifte ut beltene Hvordan justere eller skifte ut friksjonshjulet Hvordan skifte ut sikkerhetsbolt i naverHvordan gjøre snøfreseren klar for lagring Hvordan bestille reservedelerFeilsøkingstabell Varningssymboler OCH Förklaringar Innehåll1742227 Fara Varning Regler FÖR Säkert Handhavande UtbildningDrift FörberedelseService, underhåll och förvaring Rengöring av ett igensatt utkaströrUtsläpp TändningssystemAnvändning Hur man gör för att köra framåt och bakåt Figur Hur man slungar snö FigurHur man använder hjulspärrpinne Figur Innan motorn startasSnöröjningstips UnderhållsschemaHur man tar bort snö och skräp ur inmatarhuset Underhåll Hur man justerar remguiden Hur man justerar remmarnaHur man byter ut remmarna Hur man justerar eller byter ut friktionshjulet Hur man byter brytbult till inmatarenHur man förbereder snöslungan för förvaring Hur man beställer reservdelarFelsökningsschema 1742227 1742227 1742227 1742227 1742227 1742227 1742227 1742227 1742227