Alpine TME-M740BT owner manual General Setup, 11-EN

CINEMA: The monitor displays a normal picture by stretching out the picture vertically. This mode is good for displaying a cinema type picture at the 16 : 9 ratio.

CINEMA

NORMAL: The monitor displays a normal picture at the centre of the screen with a vertical black band at each side.

NORMAL

Adjusting the Touch Panel (SCREEN ALIGNMENT)

(RESET) / (SETUP)

Adjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match.

1 Touch [ ] of SCREEN ALIGNMENT.

The adjustment screen appears.

2 Accurately touch the [ ] mark provided in the lower left corner of the screen.

The screen changes to the adjustment screen.

3 Accurately touch the [ ] mark provided in the upper right corner of the screen.

This completes adjustment, and returns to the DISPLAY setup mode screen.

•If the setting is cancelled half way, press SOURCE.

VISUAL EQ™ Setting

BRIGHT

MIN(-15) to MAX(+15) (Initial Setting: 0)

COLOR

MIN(-15) to MAX(+15) (Initial Setting: 0)

TINT

G MAX(G15) to R MAX(R15) (Initial Setting: 0)

CONTRAST

MIN(-15) to MAX(+15) (Initial Setting: 0)

SHARP

MIN(-15) to MAX(+15) (Initial Setting: 0)

VISUAL EQ MODE

OFF(Initial Setting) / NIGHT M / SOFT / SHARP / CONTRAST / P-1 / P-2

OFF : Initial Setting

NIGHT M.: Suitable for movies in which dark scenes frequently appear.

SOFT:	Suitable for CGs and animated films.
SHARP:	Suitable for old movies where images are not clearly
	shown.

CONTRAST: Suitable for recent movies.

P-1: Recalls the VISUAL EQ mode being stored on preset No.P-1 from “USER MEMORY” (page 12).

P-2: Recalls the VISUAL EQ mode being saved on preset No.P-2 from “USER MEMORY” (page 12).

USER MEMORY

P-1 (Initial Setting) / P-2

You can store the settings made for “BRIGH, COLOR, TINT, CONTRAST and SHARP.”

After adjusting BRIGH, COLOR, TINT, CONTRAST and SHARP, select the preset number (P- 1) or (P-2) and store it by touching [WRITE].

•You can recall the VISUAL EQ mode stored here from P-1 or P-2 of “VISUAL EQ Mode” (page 12).

GENERAL Setup

Sound (Beep) Guide Function (BEEP)

ON (Initial Setting) / OFF

ON: Activate the Sound Guide mode.

OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed.

Adjusting the Brightness of the LED (LED BRIGHTNESS)

HIGH / NORMAL (Initial Setting) / LOW / OFF

You can set LED brightness (POWER indicator, etc.).

HIGH: Makes LED brighter.

NORMAL: Normal LED brightness.

LOW:	Makes LED darker.
OFF:	Turns LED off.

Change Sound Output (VOLUME CONTROL)

MONITOR (Initial Setting) / SYSTEM

If the unit is connected to the Vehiclehub Pro (VPA-B222), set to ON.

MONITOR: Outputs sound through the built-in speakers.

SYSTEM: Volume is adjustable from this unit if compatible devices are connected to the VPA-B222.

11-EN