Setting a Connection automatically (AUTO CONNECT)
ON (Initial Setting) / OFF
The setting can be made whether previously connected mobile phone is automatically recognized and connected or not.
ON: The previously connected mobile phone will be automatically connected.
OFF: Select a mobile phone by using [SEARCH DEVICE].
•Depending on the mobile phone, it may require setting. Refer to the Owner's Manual of the mobile phone.
Sending Name Information of the Unit (VISIBLE MODE)
ON (Initial Setting) / OFF
The setting can be made whether unit name information is sent to the Bluetooth device (mobile phone, etc.) or not.
ON: Name information of the unit
OFF: Name information of the unit is not sent to the Bluetooth device.
Receiving a Received Call automatically (AUTO
ANSWER)
ON / OFF (Initial Setting)
The setting can be made whether the call is automatically received or not when a call is received.
ON: When receiving a call, you can automatically call after approx. 5 seconds.
OFF: When receiving a call, the call will not be automatically received. Receive the call by touching [ 
].
Making effective use of Refused Call (REFUSED CALL)
ON / OFF (Initial Setting)
If you do not wish to accept a received call while driving, you can set to not receive that call by
ON: When a call is received, nothing appears in the display, and you can neither receive the call by
OFF: You can receive a call by
•If “REFUSED CALL” is set to ON when a call is received, a mobile phone will still be received.
Setting the Telephone Book to be used (PHONEBOOK)
UNIT (Initial Setting) / CARD
You can set whether to use a mobile phone or SIM card from which to download a telephone book to the unit.
UNIT: The telephone book of a mobile phone is used.
CARD: The telephone book of a SIM card, etc., is used.
Setting Volume of the Call (MIC GAIN)
MIN(1) to MAX(7) (Initial Setting:5)
The volume of a call can be set at one of 7 levels.
REAR SELECT Setup
Rear Monitor Select Function
AUX* (Initial Setting) / Bluetooth AUDIO / OFF
If another monitor (Rear) is connected to the unit, image/audio of the rear monitor can be changed from the unit, so you can enjoy separate image/audio in the rear seats.
*The name which is given as the source name in “External Input Name setting (AUX NAME)” on page 12 is displayed.
You cannot control from the rear monitor.
Setting Output of the Navigation Guidance Interruption (INT NAV. GUIDE)
ON / OFF (Initial Setting)
When a navigation guidance signal is sent to the rear output (AUX OUT), you can send the navigation guidance interruption to the rear output.
ON: When the setting is made other than OFF in “REAR SELECT Setup,” the navigation guidance interruption will be sent to rear output (AUX OUT).
OFF: The navigation guidance interruption cannot be sent to rear output (AUX OUT), regardless of the setting in “REAR SELECT Setup.”
•When OFF is set in “REAR SELECT Setup,” the navigation guidance interruption will not be sent to the rear output (AUX OUT), even if INT NAV. GUIDE is set to ON.
•If a