Sigma EF-500 manual Second Curtain Synchronization, RED-EYE Reduction, Modeling Flash

Page 21

SECOND CURTAIN SYNCHRONIZATION

When you photograph a moving subject with slow synchronization, usually the furrow of the subject will be exposed in front of the subject. The ordinary flash light will fire when the first shutter curtain is fully opened, thus the subject will be exposed from the time flash is fired to the time the shutter is closed (This is called First Curtain Synchronization). When you use second curtain synchronization, the flash will fire just before the second curtain begins to closes, and the subject will be exposed by ambient light from the time the shutter opens until the flash fires. The furrow of the subject will therefore be exposed behind the subject, creating a more natural effect.

1.Set the desired picture-taking mode of the camera

2.Select the Mode of the flash. (TTL, M modes. SD9 and SD10 can be used in M mode only)

3.Press + or – , button mark will be displayed on the LCD panel.

4.Adjust the focus, and take the picture after confirming the ready light

is lit.

First curtain synchronization will be set, if mark is not displayed.

In the Full Auto Mode “ ” of SA-300, SA-300N, SA-5 cameras, this function cannot be used.

To cancel second –curtain synchronization, turn off the mark on the LCD panel.

RED-EYE REDUCTION

When you take a picture with flash, sometimes the person’s eyes reflect the flashlight and will exhibit “red-eye” in the picture. If you use the function of “Red-eye reduction”, the flash will blink approximately 1 second before the shutter is released, and reduce the “red-eye”.

1.Press the MODE Select the mode of the flash(TTL, M modes)

2.Press + or – , button and make mark displayed on the LCD panel.

3.Adjust the focus, and take the picture after confirming the ready light is lit. ■ To cancel the “Red-eye reduction” turn of the mark.

■ In the Full Auto Mode “ ” of SA-300, SA-300N, SA-5 cameras, this function cannot be used.

MODELING FLASH

If you use the Modeling flash, you can check the lighting and shadow effects, before you take the picture.

1.Press the MODE button and select the mode.

2.Press the + button or – button several times to make the icon on the LCD panel appear.

3.Confirm that the flash is charged, then press the TEST button to fire.

EXPOSURE COMPENSATION

You can use flash exposure compensation in combination with normal exposure compensation (to control the background exposure level) in flash picture. Flash exposure compensation can be set 1/2 stops (1/3 stops with SD10) in ±3-stop increments.

1.Press the MODE button and select the TTL mode.

2.Press the SEL button to make the indicator of mark blink.

3.Press the + button or – button to set the compensation amount.

4.Press the SEL button to make compensation amount indicator stop blinking.

5.Focus on the subject.

6.Please check that the subject is within the flash range displayed on the EF 500 DG SUPER SA-N’s LCD panel.

7.You can take the picture after confirming that the Ready Light of the flash is illuminated.

21

Image 21
Contents EF-500DG Super 12 13 14 15 EF-500 DG Super SA-N 䟺1䝞䞀䜼䟻 䜿䝇䝌 䜯䝥䝭 TTL 䝳䜨䝍 䝑䝯䛱䛪䛊䛬Page 䝢䝏䝩䜦䝯 䜻䝷䜳䝱 䝦䝋䝮䝷䜴 䜪䝷䜽 䜽䝰䞀䝚 SEL SD9 SD10 EF-500 DG Super SA-N TTL ッ䛮䜦䝙䝃䞀 䞀䝗䜽䛱䛪䛊䛬 Precautions Battery Loading About the BatteryAdjusting the Flash Head Description of the PartsAttaching and Removing the Flash to and from the Camera Setting of Flash Coverage AngleWide Panel Case of use with Sigma SD9 SD10Or a service station Aperture Priority Setting Shutter Speed Priority SettingWhen used with M Mode LCD Panel IlluminationManual Flash Operation Limits of Continuous ShootingRED-EYE Reduction Second Curtain SynchronizationModeling Flash Exposure CompensationWireless Flash Except SD9 Multi Flash ModeBounce Flash Close-up ExposuresControl System Change When Built-in Flash is Used SA-7 and SA-9Slave Flash Normal Slave FlashDesignated Slave Flash Specifications Deutsch VorsichtsmaßnahmenBatteriehinweise Beschreibung der TeileEinlegen der Batterien Einstellen des BlitzkopfesAnbringen und Abnehmen des Blitzgerätes Einstellen des Ausleuchtwinkels ZoomreflektorWeitwinkelstreuscheibe Autorisierten Sigma Service TTL Blitzautomatik Beleuchtung DER LCDGrenzen der Serienauslösung Manueller BlitzbetriebKurzzeitblitzsynchronisation FP außer SA-300 Reduzierung roter Augen Synchronisation auf den zweiten VerschlussvorhangEinstelllicht BelichtungskorrekturStroboskopbetrieb Indirektes BlitzenKabelloses Blitzen Ausser SD9 Wechsel der Systemsteuerung Unter Einsatz des eingebauten Blitzgerätes 䟺SA-7 und SA-9䟻Einsatz an Kameras ohne eingebauten Blitz SD10 „Slave Gerät Normaler „Slave Geräte BetriebKabellose Zündung bestimmter „Slave Geräte Technische Daten Français Description DES Elements Alimentation ElectriqueMise EN Place DES Piles Mise EN Place ET Retrait DU Flash Ajustement DE LA Tete FlashReglage DE Langle DE Couverture Elargisseur DangleMode de priorité à louverture Mode de priorité à la vitesseMode manuel M Retro Eclairage DE Lecran LCDMode Operatoire EN Flash Manuel Limites DES Prises DE VUE Consecutives AU FlashFlash Haute Vitesse FP sauf SA-300 Reduction DE Leffet Yeux Rouges Synchronisation SUR LE Deuxieme RideauFlash Predictif Correction DexpositionFlash Indirect Mode DE Flash Stroboscopique Multi FlashFlash Sans Cordon Sauf SD9 Prise de vue rapprochéeInitialisation du système de contrôle Utilisation avec le flash intégré SA-7 et SA-9䟻Utilisation dun boîtier dépourvu de flash intégré SD10 Flash esclave Flash esclave NormalFlash esclave désigné Préparation du flash de contrôle Caracteristiques TechniquesAdvertencia Cuidado PrecaucionesDescripción DE LAS Partes Acerca DE LAS PilasCarga DE LAS Pilas Ajuste DEL Cabezal DEL Flash Montar Y Desmontar EL Flash a LA CamaraAjustar EL Angulo DE Cobertura DEL Flash Iluminación DE LA Pantalla LCD Pantalla AngularFlash Automático TTL Ajuste para la prioridad de velocidadOperación CON EL Flash Manual Limitaciones DEL Disparo ContinuoAjuste para prioridad de diafragma Cuando se utiliza con el Modo MSincronización CON LA Segunda Cortinilla Reduccion DE Ojos RojosLUZ DE Modelado Modo DE Multi Flash Estroboscópico Compensación DE ExposiciónFlash Reflejado Exposiciones de AproximaciónControl Remoto DEL Flash Excepto SD9 Sistema de Control de CambiosAl emplear el flash de la propia cámara SA-7 y SA-9䟻 Las cámaras que no lleven flash incorporado SD10Flash esclavo Flash esclavo NormalDesignación del flash esclavo Para que la cantidad de salida parpadee EspecificacionesDescrizione Delle Parti AttenzioneCaricamento Delle Batterie BatteriaRegolazione Della Testa DEL Flash Collegare E Separare IL Flash Dalla MacchinaRegolazione Dellangolo DI Copertura DEL Flash Pannello WideIlluminazione DEL Display LCD Limitazioni Quando SI Scatta in Sequenza Flash Automatico TTLFlash Manuale FP Flash Flash AD Alta Velocità Eccetto SA-300Sincronizzazione Della Seconda Tendina Flash DI Riempimento Compensazione DELL’ESPOSIZIONEModalità Multi Flash Cambiamento del Sistema di Controllo Flash IndirettoUso con le fotocamere non dotate di flash incorporato SD10 Uso del flash incorporato della䟺SA-7 e SA-9䟻Flash ausiliario Flash ausiliario normaleScegliere i flash secondari Specifiche Beskrivelse AF Flashens Dele BemærkIsætning AF Batterier Vedr BatterierJustering AF Flashhovedet Montering OG Afmontering AF FlashenVidvinkelforsats Indstilling AF Flashens UdlysningsvinkelLCD-DISPLAY Belysning TTL funktionManuel Indstilling AF Flash Kontinuerlig OptagelseLukkertidsprioriteret indstilling Blændeprioriteret indstillingSynkronisering MED Andet Lukkergardin Synkronisering PÅ Hurtige Lukkertider FP FlashReduktion AF Røde Øjne Fungerer ikke med model SA-300PILOT-LYS EksponeringskorrektionMULTI-FLASH Funktion Trådløs Flash Ikke med SD9 Bounce Flash indirekte flashNæroptagelser Kontrolsystem indstillingSlave-flash Kameraer uden indbygget flash SD10Normal Slave-flash Udvalgte Slave-flash SpecifikationerOmschrijving van de onderdelen VoorzorgsmaatregelenExterne onderdelen Instelknoppen/toetsenBatterijen Het inleggen van de batterijenHet afstellen van de flitskop Het bevestigen en verwijderen van de flitser Het instellen van de zoomreflectorGroothoek diffusor Handmatige instelling M mode TTL DDL Auto ModeVerlichting van het LCD display Sluitertijd voorkeuzeMaximale prestaties bij continu fotograferen Handmatige flitsinstellingFP Flits behalve SA-300 Rode-ogen reductie Synchronisatie van het 2e sluitergordijnModel / Testflits BelichtingscompensatieIndirect flitsen Meervoudig flitsenDraadloos flitsen Niet voor SD9 Indien de flitser van de camera wordt gebruikt䟺SA-7 en SA-9Camera’s zonder ingebouwde flitser SD10 Slave functie Voorkeuze van de slave flitser Technische gegevens5Hz 100 128 199 EF-500 Super EO 03 ∟