Honeywell SG-60 installation and operation guide Specifications

Airport Systems

1.4	Specifications
Light Output:
	Day Intensity		270,000 ±25% effective candelas, single flash
	Twilight Intensity		20,000 ±25% effective candelas, single flash
	Night Intensity		2,000 ±25% effective candelas, burst of flashes
	Beam Pattern			120º horizontally, 3 º min. vertically
				max. intensity of 3% of peak at -10º
	Flash Rate: Day			40 fpm - single white flash
	Twilight			40 fpm - single white flash
	Night			40 fpm - white burst of flashes
	Master/Slave Operation		Up to 24 slave SGF-60 Flashheads may share a common
		sync and photocell circuit from one SGC-60 Master Controller.
Electrical Input:
	Master Controller		50 Watts. 120, 208, 240, 277, 380, 480 VAC. 50, 60Hz
	Flashhead		500 Watts. 120, 208, 240, 277, 380, 480 VAC. 50, 60Hz
			Requires specific voltage selector block and manual
			change to transformer wiring for different AC voltages.
Mechanical Properties:
	Flashhead
	Weight			82 pounds (37.2 kg)
	Dimensions	18.88"w (479.4mm) x 15.25"h (387.4mm) x 10.75"d (273.1mm)
	Surface Area			1.89 square feet
	Wind Load			100 pounds at 150 mph (240kph)
	Master Controller
	Weight ………………………………………………………			........24 pounds (10.89 kg)
	Dimensions		14"w (356mm) x 12"h (305mm) x 6"d (152mm)
Operating Environment:
	Operating Temperature			-55ºC to +55ºC
	Humidity			95% relative humidity
System Operating Status Indicators:
	Flashhead, AC line power present			PWR ON Indicator DS1
	Flashhead, high voltage present on capacitors			High Voltage Indicator DS1
	(located on Trigger / High Voltage board)
	Master Controller Indicators
	Flashhead Status			LEDs DS1 - DS24, red/green
	Day Mode			LED DS25 red
	Twilight Mode			LED DS26 red
	Night Mode			LED DS27 red
SG-60 High Intensity Strobe System			1-6	Manual EPM-00000019 Rev A