Honeywell SG-60 installation and operation guide Table of Contents

Airport Systems

TABLE OF CONTENTS

SAFETY INFORMATION				V
SECTION 1. GENERAL INFORMATION				1-1
1.1	SCOPE			1-1
1.2	GENERAL DESCRIPTION			1-1
1.2.1 Model SGC-60 Master Controller				1-1
1.2.2		Model SGF-60 Flashhead		1-1
1.2.3 Ambient Light Sensor (P/N 12H00107-001)				1-1
1.3	SAFETY PRECAUTIONS			1-4
1.4	SPECIFICATIONS			1-6
SECTION 2. INSTALLATION & POWER UP				2-1
2.1	UNPACKING			2-1
2.2	SYSTEM CONFIGURATION			2-1
2.2.1		Master Controller Configuration		2-1
2.2.2		Flashhead Configuration		2-3
2.3	INSTALLATION			2-6
2.3.1		SGC-60	Master Controller	2-6
2.3.2		SGF-60 Flashhead		2-6
2.3.3 Ambient Light Sensor (Photocell)				2-7
2.3.4 Cables and Junction Boxes				2-8
2.4	INSTALLATION WIRING			2-11
2.4.1 Master Controller to Photocell Wiring				2-12
2.4.2 Master Controller Data/Communications Wiring				2-12
2.4.3 Master Controller Power Wiring				2-12
2.4.4 Master Controller Wiring For Dual Systems				2-13
2.4.5		Flashhead Wiring		2-14
2.4.6 Conduit and Tower Wiring Detail				2-14
2.4.7		Junction Box Details		2-18
2.5	FINAL INSTALLATION CHECK			2-27
2.5.1		Preliminary		2-27
2.5.2 Verify Correct Wiring in Master Controller				2-27
2.5.3		Verifying Photocell Wiring		2-27
2.5.4 Verify Proper Tower Wiring for Data/Control Cable				2-27
2.6	POWER UP AND SYSTEM TESTS			2-28
2.6.1 Master Controller Status Indicators				2-28
2.6.2		Flashhead Status Indicators		2-29
2.6.3		System Power Up		2-29
2.6.4 Verify Local Mode Operation				2-30
2.6.5 Verify Photocell Operation Connected to Controller				2-33
2.6.6 Verify Photocell Operation Not Connected to Controller				2-33
SECTION 3. PRINCIPLES OF OPERATION				3-1
3.1	OVERALL DESCRIPTION			3-1
3.2	SGF-60 FLASHHEAD			3-1
3.2.1		SGF-60 Motherboard		3-3
3.2.2		SGF-60 Digital Board		3-3
3.2.3		SGF-60 Trigger/High-Voltage Board		3-6
3.3	SGC-60 MASTER CONTROLLER			3-8
3.3.1		Power Supply		3-8
3.3.2 Flash Requests and Flashhead Status				3-8
3.3.3		System Mode Selection		3-9
EPM-00000019-001			iii	Rev A