Memory mode
The last temperature taken before the thermometer powers down is stored in memory. To enter the memory mode, press the 
/mem button.
The last stored temperature is displayed along with the MEM symbol.
Even in memory mode, a new temperature can be taken provided
that the ready symbol 
is shown.
To quit the memory mode, press the 
/mem button again.
LCD light
for easy nighttime reading
Changing the temperature scale
This thermometer is shipped with the Celsius temperature scale activated. If you wish to switch to Fahrenheit (°F), proceed as follows:
øTurn on the thermometer.
(If it is already turned on, make sure it is not in memory mode.)
øPress the 
/mem button and keep it pressed. Then press and release the activation button to switch over to the «change temperature scale» mode.
øBy pressing the activation button again, the Fahrenheit scale is activated, «°F» is displayed on the LCD. Each further pressing of the activation button toggles the scale between °C and °F.
øRelease the 
/mem button to return to the ready symbol 
.
The temperature stored in memory will automatically be converted to the selected scale when displayed on the LCD.
9