Door Reversal 11
4Remove the two door closer inserts from the existing bottom hinge and install as shown on the new bottom hinge (see Figure 17).
Figure 17
DOOR
CLOSER
INSERTS
BOSS
5Remove existing bottom hinge (3 screws) and remount on opposite side TOP. Remove hinge screw pin.
6With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (see Figure 18).
7Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin (see Figure 19). Be sure that the bosses on the closers align with holes in hinge and hinge plate.
Figure 19
BOSS
8Tilt top of door into position in top hinge and install top hinge screw pin.
9In empty hinge holes, install plastic screw plugs (3 top and 3 bottom) and door hole plug (1,door top) removed in step 2.
Figure 18 |