Electrolux 15 manual Maintenance, Special Considerations, Maintaining and Cleaning Your Icemaker

Page 16

16Maintenance

Special Considerations

•For best performance, keep the unit out of direct sunlight.

•Turn the unit OFF and dispose of any ice cubes if the unit will not be used for 5 days or more. Prop door open to allow for air circulation and prevent mold and mildew.

•If the ambient temperature is expected to drop below 45°F (7°C), drain all water from the unit to prevent freezing damage not covered by the warranty.

•High ambient temperatures, 110°F (43°C) or higher, may reduce the unit’s ability to reach low temperatures and may also reduce the ice production rate.

Maintaining and Cleaning Your Icemaker

Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or other special considerations.

Exterior Cleaning - As Required

The door, grille and cabinet may be cleaned with a mild detergent and warm water solution. Do not use solvent based or abrasive cleaners.

Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

Stainless Steel Models

•Stainless steel models may discolor when exposed to chlorine gas, pool chemicals, salt water or cleaners with bleach.

•Keep your stainless unit looking new by cleaning with a high quality, all-in-one stainless steel cleaner/polish on a monthly basis. Frequent cleaning will remove surface contamination that could lead to rust. Some installations will require cleaning on a weekly basis.

•DO NOT CLEAN WITH STEEL WOOL PADS.

•DO NOT USE CLEANERS THAT ARE

NOT SPECIFICALLY INTENDED FOR STAINLESS STEEL (this includes glass, tile and counter cleansers).

•If any surface discolors or rusting appears, clean it quickly with Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive cloth.

Always clean in the direction of the grain. Always finish this process with a high quality, all-in-one stainless steel cleaner/polish to prevent further problems.

•USE OF ABRASIVE PADS SUCH AS

SCOTCHBRITE WILL CAUSE THE GRAINING IN THE STAINLESS TO BECOME BLURRED.

•Rust that is allowed to linger can penetrate into the surface of the stainless steel and become impossible to remove.

CAUTION

Stainless steel models exposed to chlorine gas and moisture, such as areas with spas or swimming pools, may have some discoloration of the stainless steel. Discoloration from chlorine gas is normal. Follow exterior cleaning instructions.

Interior Cleaning - As Required

1Disconnect power to the ice maker.

2Open the door and remove any ice from the storage bin.

3Wipe down the interior and storage bin with a solution of non-abrasive mild soap or detergent and warm water. Rinse with clean water.

4Sanitize the bin with a solution of 1 tablespoon of bleach in 1 gallon of warm water. Rinse thoroughly with clean water.

5Check that all drain connections are in place.

CAUTION

•DO NOT use solvent cleaning agents or abrasives on the interior. These cleansers may transmit taste to the ice cubes, or damage or discolor the interior.

•DO NOT use any cleaner on the evaporator plate other than Ice Machine Cleaner.

Other cleaners may affect ice quality, or cause damage to the unit that

is not covered under warranty. See AUTOMATIC CLEAN CYCLE for more information.

6 Reconnect power to the unit.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Use & Care Guide Finding Information Please read and save this guideKeep a record for quick reference Questions?Table of Contents Safety Important Safety InstructionsInstallation Dimensions Installing the DrainInstallation Connecting a Drain PumpSite Preparation Preparing the SiteConnecting the Water Supply Water Supply ConnectionLeveling Leveling the unitDoor Reversal Reversing the Door some modelsDoor Closer Inserts Boss Door Adjustment Adjusting the DoorBuilt-In Installation / Start-Up Installing a Built-InInitial Start-Up Normal Operating SoundsNormal Operation OperationIce Dispenser Operation & Care Ice CubeThickness Adjustment Interval As RequiredMaintaining and Cleaning Your Icemaker MaintenanceSpecial Considerations Condenser Cleaning Every 3 Months Self Cleaning Every 6 MonthsOverflow Inlet Screen Cleaning Every Year Draining for non-useBefore You call For Service TroubleshootingTroubleshooting Guide If Service is required Problem Possible Cause RemedyWarranty Information ConsumerGuía de uso y cuidado Dónde obtener información Lea y conserve este manualAnote estos datos para referencia futura ¿Preguntas?Índice Instrucciones importantes de seguridad Precauciones de seguridadDefiniciones Precauciones generalesInstalación del desagüe Dimensiones de la instalaciónDesagüe por gravedad Instalación Conexión de una bomba de desagüePreparación de la ubicación Preparación del lugar de ubicaciónConexión del suministro de agua Conexión del suministro de aguaNivelación Nivele la unidadInversión de la puerta Inversión de la puerta algunos modelosAbajo y el conector del agujero de la puerta Ajuste de la puerta Ajuste de la puertaInstalación empotrada y encendido inicial Instalación empotradaEncendido inicial Sonidos normales de funcionamientoFuncionamiento normal FuncionamientoGrosor de los cubitos de hielo Ajuste del grosor de los cubitos de hielo Bomba de desagüeIntervalo según se requiera Intervalo no se requiereFactores especiales a tener en cuenta MantenimientoMantenimiento y limpieza del fabricador de hielo Limpieza del condensador cada 3 meses Autolimpieza cada 6 mesesCubierta Delantera Filtro de limpieza una vez al año Servicio técnico, almacenamiento Vacaciones y transporteDrenaje de la unidad Localización y solución de averías Antes de solicitar servicio técnicoGuía de localización y solución de averías Sección MantenimientoSi se requiere servicio técnico La sección Conexión del suministro de aguaSe enumeran a continuación Información sobre la garantíaEsta garantía no cubre lo siguiente Novembre Veuillez lire et conserver ce guide RenseignementsDes questions? Table des matières Mesures de sécurité importantes Mesures de sécuritéDéfinitions Précautions généralesInstallation du tuyau de vidange Dimensions pour linstallationSystème de vidange par gravité Installation Raccorder la pompe dévacuationPréparation de lemplacement Préparer lemplacementRaccordement de l’alimentation en eau Raccorder l’alimentation en eauMise à niveau Mettre l’appareil à niveauInversion de la porte Inverser la porte certains modèlesAlignées avec les trous de la charnière et de la Ajustement de la porte Ajuster la porteInstallation encastrée / Mise en marche Encastrer lappareilMise en marche initiale Bruits d’un fonctionnement normalFonctionnement Fonctionnement normalFonctionnement et entretien de la machine à glaçons Épaisseur des glaçonsRéglage de lépaisseur des glaçons Pompe dévacuationIntervalle de réglage Au besoin Intervalle de réglage Non nécessaireSituations particulières EntretienEntretenir et nettoyer votre machine à glaçons Nettoyage du condenseur Tous les trois mois Autonettoyage Tous les six moisPanneau Avant Nettoyage de la grille d’entrée Chaque année Vidange dun appareil inutiliséAvant de faire appel au service après-vente 20 DépannageGuide de dépannage Consultez la section Mise à niveau de l’appareilDépannage Si vous devez faire appel à notre service après-venteRaccordement de l’alimentation en eau De ce qui figure dans la liste suivante GarantieCette garantie ne couvre pas ce qui suit

15 specifications

Electrolux, a renowned name in home appliances, has unveiled its latest innovation, the Electrolux 15. This model marks a significant advancement in the realm of kitchen appliances, seamlessly blending style, efficiency, and cutting-edge technology.

The Electrolux 15 features a sleek and modern design that complements any kitchen aesthetic. It is available in various finishes, including stainless steel, black, and white, allowing users to select the best option to match their home décor. The intuitive control panel is user-friendly, showcasing a combination of touch-sensitive buttons and a digital display that makes it easy to navigate through its numerous functions.

One of the standout features of the Electrolux 15 is its advanced cooking technology. The inclusion of induction cooking technology ensures rapid heating while maintaining precise temperature control. This not only speeds up the cooking process but also provides energy efficiency, as it uses only the necessary energy to cook food perfectly. Additionally, the model is equipped with a powerful convection oven that ensures even cooking by circulating hot air around the food.

Moreover, the Electrolux 15 includes smart cooking solutions, such as pre-programmed settings for various dishes. These settings take the guesswork out of cooking, allowing users to select their desired dish and let the appliance handle the rest. The oven's built-in smart thermometer takes temperature readings, ensuring that meals are cooked to perfection, whether it’s a succulent roast or a delicate dessert.

Cleaning the Electrolux 15 is made simple with its self-cleaning technology. The oven features a pyrolytic cleaning function that heats the interior to high temperatures, reducing stuck-on food and grease to ash, which can then be easily wiped away.

Safety is also a priority with this model. The Electrolux 15 comes with a range of safety features, including auto shut-off and child lock functions, giving users peace of mind while cooking.

With its combination of aesthetic appeal, innovative features, and user-friendly functionalities, the Electrolux 15 sets a new standard in kitchen technology. It is designed not just to meet, but to exceed, the expectations of modern cooks, making meal preparation an enjoyable and efficient experience.
Top Page Image Contents