3M XT-1, G5 Set System Date and Time, Change Global Settings, Acoustic Echo Canceller

Page 20

Configuration

Acoustic Echo Canceller

Perform the following procedure if there is a delayed repetition (echo) of the outbound sound:

Enter the base station configuration mode, see page 11.

Make a new selection for 05 Noise Reduction > Acoustic Echo Canceller. Options are Min, Low, Med, and Max. You may need to experiment for a setting that works best for your ambient noise environment and staff.

Set System Date and Time

Perform the following procedure to set the system time and date.

Enter the base station configuration mode, see page 11.

Change the date and time values for 06 Set Time & Date in the Time and Date fields as required. Use the arrows to scroll from one field to the next and type new values over the existing data in the formats shown in parentheses:

HH = Hours (01 to 24, e.g., 6:00 pm is 18)

MM = Minutes (01 to 60)

SS = Seconds (01 to 60)

MMM = Month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec)

DD = day (01 to 31)

Year = Last two digits of the year (00 to 99, 20 is fixed and cannot be changed)

Change Global Settings

Global settings are an assortment of options that you must choose based upon the basic configuration of your system.

Text and Audio Prompts Language

You can choose between English, Spanish, German, and French language for all text and audio prompts, which is essentially all of the factory prerecorded information coming from the base station and all of the printed text on the display.

Note:

Changing the text and audio prompt language will also change the language of the headset messages.

Perform the following procedure to change the text and audio prompts:

Enter the base station configuration mode, see page 11.

Change the value for 07 Global Settings > Text & Audio Prompts Language to English, Español, Deutsch, or Francais.

Drive Thru Audio Duplex Mode

The system can function using half duplex or full duplex modes. Choosing between the two modes is based upon the desired operation.

November 6 2014 – Revision 2.1

3M™ Drive-Thru Systems Model G5 and Model XT-1

Page 20 of 77

Operating Instructions

Image 20
Contents Operating Instructions 3M Commercial Solutions Division Table of Contents Assembling a 3M Drive Thru Headset G5 Maintenance Alert Message External Trigger Inputs IndexSafety Information OverviewOther Conventions Important Notes and NotesImportant Note FCC and Industry Canada InformationFCC Note FCC and IC IdentifiersRecycling / Disposal Notice to European Union customers Navigating the Base Station Display ConfigurationEnter Configuration Mode Interpreting Display Information ButtonsConfiguring with a Computer ∙ Cycle the power to the base station Logging into the Base Station with a PCChange Basic Volume Settings Inbound Microphone VolumeOutbound Talk Volume Vehicle Alert VolumeChange the Monitor Volume Inbound ListenOutbound Talk Vehicle Present Change the Night Volume Vehicle Approach Messages Greeter MessagesRemove Headsets Registering HeadsetsAdd Headsets List All Headsets Resetting Inactive DaysChange Noise Reduction Level Checking Headset Software RevisionChange Global Settings Acoustic Echo CancellerDrive Thru Audio Duplex Mode Set System Date and TimeStore is Now Closed Prompt Channel Heard by Order TakerNumber of Base Stations at this Site Pull Ahead Prompt Customer Order Point Prompt LanguageDetector Type Order Takers and Page Messages in Cross Lane ModeOrder Point Talk with No Vehicle Kitchen Noise Reduction Important NotesOrder Taking Modes Setup XT-1 Basestation Software Update Kit XT-1Haptics Vibration Alerts on Headsets Blue LED Alerts on HeadsetsHoliday/Exception Schedule Change Site SchedulingRegular Site Schedule Change Site Information Change Self MonitoringChange Passcodes User PasscodesTwo Base Station Setup Installer SetupLoad Installation Settings Save Installation SettingsFactory Setup Restore Factory Defaults Reboot SystemActivate the Backup Intercom Create and Load TemplatesPage Operation 3M Drive Thru Headset G5November 6 2014 Revision Operation 3M Drive-Thru Systems Model G5 and Model XT-1 Component Identification and Description ∙ T1 and T2 Talkbuttons Connect you to the order pointIndicator Light Modes G5 Battery Indicator Light ModesG5 Headset Indicator Light Modes Fitting the Headset Replace the Battery Out of Range XT-1 HeadsetsCleaning Component Identification and Description Headset Replace the Battery Out of Range Change Order Taking Mode Base Station SetupNavigating in the Base Station in Run Mode Talk Manual Latching, Push to Talk, Automatic Explanation of Order Taking ModesListen Auto, Manual, and Always On Split Lane Which Order Taking Mode to SelectChange Lane Mode Change Volume Mode Cross LaneMaintenance G5 HeadsetReplacing the Carrier Disassembling the Carrier from the PodG5 Headset Charger Refitting the headset with the new CarrierReplacing the Ear and Headband Pads LocationCleaning the Contacts in the Headset Charger wells Low Battery MessageG5 Batteries Care, Handling and StorageImportant Information about Rechargeable Batteries Disposing of BatteriesMaking Sure Batteries are Ready for Use XT-1 Battery Charger Cleaning the ContactsXT-1 Headset XT-1 BatteriesCharging Status Indicator Important Information about Rechargeable Batteries Troubleshooting Headset Indicator LightsG5 Headset Indicator Light Modes General Troubleshooting Problem Possible Cause SolutionPress the other button into the correct Battery and Battery Charger Troubleshooting XT-1 Battery and Battery ChargerAppendix Declaration of Conformity Appendix Base Station Specifications PhysicalElectrical FunctionalAppendix G5 Charger Specifications Appendix Greeter Module Greeter SetupEnter the Greeter Configuration Menu Message Activation Record MessageNameBreakfast Service=Start Choose Headsets Messages Playback ToGreeter Message Properties Change Playback Delay TimeMessage Daypart Definitions Change Playback Mode Set Greeter Playback through HeadsetsTurn on Tone to Headsets During Greeter Playback Set Playback through MonitorGreeter Revision Turn on Restaurant Closed Playback MessageTurn on External Detector Playback Message Alert & Reminder Message Properties Alert & Reminder Message PropertiesMessage Names Dual Lane Systems LaneTandem Pull Ahead Playback Message Start Time Greeter Setup System DefaultsDelay Count Greeter Setup Customer Settings Alert & Reminder PropertiesGreeter Setup Example Settings Index 66, 67, 68, 69Talk 3M, Thinsulate, Tufcote and ScotchBrite are trademarks of 3M
Related manuals
Manual 8 pages 46.54 Kb