Maintenance
XT-1 Headset
Replacing the Ear and Headband Pads
To replace the ear pad, remove the worn/damaged ear pad from the ear cup and replace it with a new pad.
Headband Pad
Ear Pad
Figure 6
To replace the headband pad, remove the worn/damaged pad by peeling it from the back of the battery housing. Remove protective backing from new pad and press it into place on the back of the battery housing.
XT-1 Battery Charger
Location
The battery charger should be placed on a flat surface such as a desktop or table in a clean, dry environment.
Cleaning the Contacts
If the indicators fail to light during charger operation, clean the contacts using a
XT-1 Batteries
Care, Handling and Storage
∙Avoid dropping batteries.
∙Do not carry batteries in your pockets or leave them in hot, damp or dirty places.
∙Clean the battery contacts periodically using a
∙Be careful not to short the battery contacts together.
∙Do not set the batteries
November 6 2014 – Revision 2.1 | 3M™ |
Page 52 of 77 | Operating Instructions |