Appendix: Greeter Module
1.Enter the greeter configuration menu.
2.Select 7 Alert Message External Trigger Inputs.
:ALERT MESSAGE EXTERNAL TRIGGER INPUTS:
‘SPLIT/CROSS’Input Pin=>Original Mode<
‘ORDER TAKING’Input Pin=>Original Mode<
‘DAY/NIGHT’Input Pin=>Original Mode<
:ALERT MESSAGE EXTERNAL TRIGGER INPUTS:
‘EXT_MSG’ Input Pin=>Original Mode<
NOTE: In Original Mode, This Input Will
Ignore ALL Daypart Settings.
3.Change the value of each input setting. Your choices are:
∙Original Mode - The Greeter Message Properties setting determines if the EXT_MSG input plays a message.
∙<msg name> - Selecting a message name means the corresponding message will play when the selected external input is activated. Message choices include all messages of Type
ALERT.
Message Names
Perform the following procedure to customize the message names. The names can also be edited from the “Record Message” menu:
1.Enter the greeter configuration menu.
2.Select 8 Message Names.
|
| :MESSAGE NAMES: |
| ||
001: | > | Breakfast 1 | < | ▐ | > |
003:<Breakfast 2 > | ▐ | > | |||
005:<Lunch 1 | > | ▐ | > | ||
|
|
|
| ||
|
| :MESSAGE NAMES: |
| ||
007: | > | Lunch 2 | < | ▐ | > |
009:<Evening 1 | > | ▐ | > | ||
011:<Reminder 1 | > | ▐ 012:<Reminder 2 | > | ||
|
|
|
| ||
|
| :MESSAGE NAMES: |
| ||
013: | > | Reminder 3 | < | ▐ 014:<Reminder 4 | > |
015:<Cooler Open > | ▐ 016:<Door Open | > | |||
|
|
|
|
|
|
3. Using the , | , ⊳, | and Enter keys, select a message name use the |
keypad to enter each character. Advance to the next character in the | ||
name using the | key. |
|
Dual Lane Systems – Lane 2
In a dual lane system, the headsets are programmed to the Lane 1 base station, so settings pertaining to headsets are absent from the Lane 2 base station.
The following menu choices are available.
November 6 2014 – Revision 2.1 | 3M™ |
Page 70 of 77 | Operating Instructions |