Overview
∙Use the power supply indoors and in dry locations only.
To reduce the risks associated fire, explosion & property damage:
∙Do not open, crush, or expose to heat above 55 °C/130 °F. For additional charging and use instruction refer to operators manual
∙The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 55 C/130 F, or incinerate. Replace model
∙Always replace batteries, battery chargers and power supplies with 3M approved units acceptable for use in this system to avoid system function & safety concerns.
∙The 3M™
∙Do not modify this 3M™ Wireless Communication Syst em Model XT- 1, or 3M™ Drive Thru Headset G5. Install only 3M p rovided components. Use only 3M approved system replacement parts.
CAUTION
To reduce the risks associated with environmental contamination due to battery pack & to lead in the solder:
∙Dispose of batteries, power supplies, battery charger and base station in accordance with federal, state & local requirements. If preferred, return these components to 3M Service Center for recycle.
Other Conventions
Important Notes and Notes
Important Note:
It is strongly recommended that you pay attention to information inside of an “Important Note:” box.
Note:
You may find information inside of a “Note:” box he lpful.
FCC and Industry Canada Information
Important Note:
FCC RF Exposure Statement:
3M™ Wireless Communication System, Model
November 6 2014 – Revision 2.1 | 3M™ |
Page 8 of 77 | Operating Instructions |