3M XT-1 operating instructions G5 Battery Indicator Light Modes

Operation

Indicator Light Modes

Use the table below to understand the meaning of the indicator light on the G5

Battery and the G5 headset:

Note:

The Battery’s LED indicator lights will be lit only when:

The button on the battery is pressed and held down.

The battery is inserted into a slot on the G5 Battery Charger.

The (headset along with the battery) is inserted into the Headset Charging Station, G5.

		G5 Battery Indicator Light Modes
Indicator		Mode Description
Green LEDs		The battery is out of the G5 battery Charger and the button has been pressed and
		held down.
	1st LED
		Each LED represents 25% charge.
		A fully charged battery would have all 4 LEDS lit Green.
	4th LED	From the top (in the diagram on the left) if
		4 successive LEDs lit green indicates a charge between 75% and 100%
		3 successive LEDs lit green indicates a charge between 50% and 74%
		2 LED lit green indicates a charge between 25% and 49%
		1 LED lit green indicates a charge between 0% and 24%
One of the LEDs is blinking		The battery is in the Charger and is currently charging
Green		From the top:
		1st LED flashing Green – Battery currently between 0 and 25% charge
		1st and 2nd LED flashing Green – Battery currently between 26 and 50% charge
		1st, 2nd and 3rd LED flashing Green – Battery currently between 51 and 75% charge
		All 4 LEDs flashing Green – Battery currently between 76 and 100% charge
Top and Bottom LEDs are		Battery End of Life.
Green		Replace the battery
Bottom LED blinking Green		Charge on the battery has depleted below 5% of its State of Charge.
(Battery not in charger)		The battery needs to be charged immediately.

3M™ Drive-Thru Systems Model G5 and Model XT-1 November 6 2014 – Revision 2.1

Operating Instructions Page 35 of 77