Configuration
Note:
In half duplex installations, all latching order taking modes and hands free mode are disabled.
Perform the following procedure to change the drive through audio mode:
∙Enter the base station configuration mode, see page 11.
∙Change the value for 07 Global Settings > DriveThru Audio Duplex Mode to Full or Half.
∙In
∙In
Page Channel Heard by Order Taker
You can enable or disable the order taker from being able to hear any paging while speaking to a customer over the customer order point. This may prevent interference with the order taking process.
Perform the following procedure to enable or disable the order taker hearing pages while talking:
∙Enter the base station configuration mode, see page 11.
∙Select 07 Global Settings.
∙To enable or disable the monitor playing the outbound talk, change the value for PAGE Channel Heard by Order Taker: to NO or YES.
Number of Base Stations at this Site
When there are two base stations used together (tandem, dual, or
Perform the following procedure to enable the two stations to work together:
On the base first station:
∙Enter the base station configuration mode, see page 11.
∙Change the value for 07 Global Settings > Number of BaseStations at This Site to 2.
∙Press Enter to implement the change.
∙On the first base station, stations, change the value for 07 Global Settings > Lane Number of This Base Station to 1.
On the second base station:
∙Enter the base station configuration mode, see page 11.
∙Change the value for 07 Global Settings > Number of Base Stations at This Site to 2.
∙Press Enter to implement the change.
∙On the second base station, stations, change the value for 07 Global Settings > Lane Number of This Base Station to 2.
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed prompt to let customers know in your absence that the store is closed:
3M™ | November 6 2014 – Revision 2.1 |
Operating Instructions | Page 21 of 77 |