3M XT-1, G5 operating instructions Pull Ahead Prompt, Customer Order Point Prompt Language

Configuration

Note:

Make sure that you disable the automatic store closed prompt in stores that are open 24 hours.

I.Enter the base station configuration mode, see page 11.

∙Change the value for 07 Global Settings > ”Store is Now Closed” Prompt? to Yes or No.

Pull Ahead Prompt

You can let customers know to pull ahead when they are at order point #2 in a tandem drive thru when it is out-of-service.

	Pick Up
	Cash
Order	Order
Point #2	Point #1

Figure 1

Perform the following procedure on Base #2 to enable or disable the automatic pull ahead for Order Point #2:

∙Enter the base station user service mode, see page 11.

∙Change the value for 07 Global Settings > ”Pull Ahead” Prompt (Tandem Only)? to Yes or No.

Customer Order Point Prompt Language

Perform the following procedure to select the language(s) of the store closed and pull ahead prompts. The prompts can be spoken in English, Spanish, French, German, or repeated in multiple languages:

∙Enter the base station configuration mode, see page 11.

∙Change the value for 07 Global Settings > Order Point Prompts in English? to Yes or No.

∙Press Enter to implement the change or press Mode to abandon the change and leave the option at its previous setting.

∙Change the value for 07 Global Settings > Order Point Prompts in Spanish? to Yes or No.

∙Press Enter to implement the change or press Mode to abandon the change and leave the option at its previous setting.

∙Change the value for 07 Global Settings > Order Point Prompts in French? to Yes or No.

∙Press Enter to implement the change or press Mode to abandon the change and leave the option at its previous setting.

∙Change the value for 07 Global Settings > Order Point Prompts in German? to Yes or No.

November 6 2014 – Revision 2.1	3M™ Drive-Thru Systems Model G5 and Model XT-1
Page 22 of 77	Operating Instructions