3D Connexion GNS 530(A) manual Airport Frequency, 14 111.55 Highlighted

SECTION 7

WPT PAGES

7.4 AIRPORT FREQUENCY PAGE

The Airport Frequency Page displays radio frequencies and frequency types for the selected airport, as well as sector and altitude restrictions (where applicable). If the selected airport has a localizer-based approach, the localizer frequency(ies) is also listed on the Airport Frequency Page (Figure 7-13). The Airport Frequency Page may be used to quickly select and tune a COM or VLOC frequency.

To view frequency information for a particular airport on the Airport Frequency Page, enter the Airport’s Identifier per Section 7.1.

Frequency	Airport Identifier,	Frequency
Type	Symbol, and Type

Scroll

Bar

Usage
Restrictions
Information
Position of
Current Page
within Current
Page Group	Number of Pages in
Current
Page Group	Current Page Group

Figure 7-13 Airport Frequency Page

Scrolling through the frequency list and tuning to a desired frequency on the list:

1)Press the small right knob to activate the cursor.

2)Turn the large right knob to scroll through the list, placing the cursor on the desired frequency (Figure 7-14). If there are more frequencies in the list than can be displayed on the screen, a

scroll bar (Figure 7-13) along the right-hand side of the screen indicates the cursor’s position within the list.

Figure 7-14 111.55 Highlighted

3)Press the ENT Key to place the selected frequency in the standby field of the COM or VLOC Window (Figure 7-15).

VLOC

Standby

Field

Figure 7-15 111.55 Moved to Standby Field

4)To remove the flashing cursor, press the small right knob.

Some listed frequencies may include designations for limited usage, as follows:

•‘TX’ - Transmit only

•‘RX’ - Receive only

•‘PT’ - Part time frequency

7-8 GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. E