GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. E 10-29
SECTION 10
AUX PAGES
Setup Page: COM Configuration
Setting the COM channel spacing:
1) Select ‘COM Configuration’ from the Setup
Page, using the steps described at the beginning
of this section.
2) The flashing cursor highlights the channel
spacing field (Figure 10-44). Turn the small
right knob to select the desired channel
spacing: 8.33 kHz or 25.0 kHz. Press the ENT
Key when finished.
Figure 10-44 Channel Spacing Window
Restoring Factory Settings
When making changes to any Setup Page option, a
‘Restore Defaults?’ menu selection allows the pilot to
restore the original factory settings (for the selected option
only). For example, with the CDI/Alarms Page displayed,
the ‘Restore Defaults?’ option restores all airspace alarms
and CDI settings to the original factory values.
Restoring a Setup Page option to the origi-
nal factory settings:
1) Select the desired menu option from the
Setup Page, using the steps described at the
beginning of this section.
2) Press the MENU Key to display the Date/Time
Page Menu (Figure 10-45).
Figure 10-45 Date/Time Page Menu
3) With ‘Restore Defaults?’ highlighted, press the
ENT Key.