Additional Features

Message Waiting Indicator

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you configure the MWI LED on Line 2 only, the LED illuminates if a voicemail is pending on Line 2. If you configure the MWI LED for all lines, the LED illuminates if a voicemail is pending on any line on the phone (lines 1 through 9).

You configure the MWI using the Aastra Web UI.

Configuring Message Waiting Indicator

Aastra Web UI

1.Click on Basic Settings > Preferences > General.

2.The Message Waiting Indicator Line field is set to all lines by default. If required, change the setting to a specific line by selecting a line from the list. Valid values are All and lines 1 through 9.

3.Click Save Settings.

41-001523-00 REV00 – 04.2014

149

Page 155
Image 155
Aastra Telecom 6865i manual Configuring Message Waiting Indicator