Getting Started

The 6865i must be set up and configured prior to its first use. This section describes phone behavior and start up screens you may see when the phone is first plugged in, or when it is restarted.

Plugging in and Starting the Phone

The 6865i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone.

Note:

Some start up screens only appear the first time you connect your phone, or if your phone has been factory defaulted.

The phone displays the following startup screens:

Aastra 6865i

Aastra 6865i

LLDP

Aastra 6865i

DHCP

Initializing

network

During the first start up, the 6865i phone attempts to contact the Redirection and Configuration Server (rcs.aastra.com) for current server information. No personal information is transmitted from the phone during this process.

Contacting

Redirector

The 6865i phone may also look for configuration servers on your local network (press 4Skip to continue without check- ing for servers).

Auto Discovery

Skip

41-001523-00 REV00 – 04.2014

7

Page 13
Image 13
Aastra Telecom 6865i manual Getting Started, Plugging in and Starting the Phone, Aastra, Auto Discovery Skip