Aastra Telecom 57I C53I Select Priority, To set Vlan ID and priority for Port, Select Passthrough

Network Configuration of the IP Phones

Advanced Network Settings

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Network Address Translation (NAT) Settings” on page A-18.

IP Phone UI

Step Action

1Press on the phone to enter the Options List.

2Select Network.

3Select VLAN.

To globally enable/disable VLAN and set priority for non-IP packets:

4Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)

5Press Done to save the changes.

6Select Phone.

7Select Priority.

8Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.

9Press Done to save the changes.

10Press Done again to return to the VLAN Phone menu.

To set VLAN ID and priority for Port 0:

11Select VLAN ID and enter a value from 1 to 4094 to specify the VLAN ID of Port 0.

12Press Done to save the change.

13Select Priority.

14Select a VLAN Protocol (SIP, RTP, and/or RTCP).

15Enter a VLAN priority value from 0 to 7 for the associated Protocol.

16Press Done to save the changes.

17Press Done again to return to the VLAN Settings menu.

To set VLAN ID and priority for Port 1 (passthrough port):

18Select Passthrough.

Configuring the IP Phones

41-001160-00, Rev 01 Release 2.0 4-37