Network Configuration of the IP Phones

Advanced Network Settings

Configuring HTTPS Client and Server Settings

Use the following procedures to configure the HTTPS client and server for the IP phones.

Note: To enable or disable tbe IP phones to use the HTTPS protocol as the configuration server, see the section, “Configuring the Configuration Server Protocol” on page 4-13.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “HTTPS Client and Server Settings” on page A-20.

IP Phone UI

Step Action

1Press on the phone to enter the Options List.

2Select Network.

3Select HTTPS ->Client Method.

4Press Change to select a client method to use for HTTPS. Valid values are: SSL 3.0 (default)

TSL 1.0

5Press Done to save the changes.

6Press Done 3 more times to return to the Options List menu.

7Select Phone Status.

8Select Restart Phone and press Restart to reboot the phone for the HTTPS settings to take affect.

Configuring the IP Phones

41-001160-00, Rev 01 Release 2.0

4-25

Page 91
Image 91
Aastra Telecom 57I C53I Configuring Https Client and Server Settings, Select Network Select Https -Client Method, Tsl