Network Configuration of the IP Phones

Configuration Server Protocol

Configuration Server Protocol

You can download new versions of firmware and confguration files from the configuration server to the IP phone using any of the following types of protocols: TFTP, FTP, HTTP, and HTTPS. The TFTP setting is the default download protocol. You can configure the type of protocol that the IP phone uses by setting it in the configuration files, the IP phone UI, or the Aastra Web UI.

Note: For DHCP to automatically populate the IP address or domain name for the TFTP server, your DHCP server must support Option 66. For more information, see this chapter, the section, “DHCP” on page 4-4.

Configuring the Configuration Server Protocol

Use the following procedure to configure the configuration server protocol.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration Server Settings” on page A-11.

Configuring the IP Phones

IP Phone UI

 

Step

Action

 

 

 

 

 

 

1

Press

on the phone to enter the Options List.

 

 

 

 

2

Select Network.

 

 

 

 

3

Select Download Protocol.

 

4

Select "Use TFTP", "Use FTP", "Use HTTP", or “HTTPS”.

 

 

The IP phone uses the protocol you select to download new firmware and configuration files from

 

 

the configuration server.

 

 

 

 

5

Press Done to save the changes.

 

 

 

 

41-001160-00, Rev 01 Release 2.0

4-13

Page 78 Page 80
Page 79
Image 79
Aastra Telecom 57I C53I manual Configuring the Configuration Server Protocol, Select Download Protocol
Page 78 Page 80
Top Page Image Contents