Aastra Telecom 57I C53I manual AastraIPPhoneImageMenu

IP Phone Administrator Guide How to Create an XML Application

Appendix G

AastraIPPhoneImageMenu

The AastraIPPhoneImageMenu object allows you to use a bitmap image to display as a menu. Each menu item is linked to a keypad key (0-9, *, #). You can use this type of image object when you want to display menu choices as a non-ASCII character set or with pictures only. You can specify the placement of the image on the screen by setting the following attributes:

•verticalAlign

•horizontalAlign

•height

•width

The image is specified as a series of hexadecimal characters. Two hex characters map to one byte of pixel data, where each bit represents a pixel. The image data describes the bitmap from left to right and top to bottom. The data is padded on an 8-bit boundary, so if the height and width do not match the pixel information, then the image will not display correctly. The character strings map to the middle and four corners of the screen. If desired, you can specify an integer as an absolute pixel for customized displays.

XML Example:

The XML script for the AastraIPPhoneImageMenu object is as follows:

<AastraIPPhoneImageMenu>

<Image verticalAlign = "top,middle,bottom,'pixel'", horizontalAlign = "left,middle,right,'pixel'" height="'integer'", width="'integer'">

FF00F800FF00FFFFFFFFFFFF00FF00FF00FFF8F200

</Image>

<!-Base attribute is optional-->

<URIList base = "http://someserver/"> <URI key = "0">link1.php</URI> <URI key = "1">link2.php</URI> <URI key = "#">link3.php</URI>

</URIList>

</AastraIPPhoneImageMenu>

G-34 41-001160-00, Rev 01 Release 2.0