Aastra Telecom 57I C53I manual Configuring XML for Directed Call Pickup

Operational IP Phone Features

Operational Features

Configuring XML for Directed Call Pickup

Use the following procedure to configure XML for Directed Call Pickup in the configuration files.

Notes:

1. Before implementing this procedure, you must create an XML application that the phone uses when the XML softkey or programmable key is pressed. This XML application must be entered as a URI in the “Value” field of the XML key. For information about creating an XML script, see Appendix G, the section “Text Menu Object (Menu Screens)” on page G-6.

2.You must enable Directed Call Pickup bofore performing these procedures. See “Enabling/Disabling Directed Call Pickup” on page 5-52.

Configuration Files

To set XMLin the configuration files for Directed Call Pickup, see Appendix A, the section, “Softkey/ Programmable Key/Feature Key Parameters” on page A-108.

To enable Directed Call Pickup on the IP phone using the configuration files, see Appendix A, the section, “Directed Call Pickup (BLF or XML Call Interception) Settings” on page A-104.

Operational IP Phone Features

41-001160-00, Rev 01 Release 2.0 5-59