Aastra Telecom 57I C53I manual Configuring Ring Tones and Tone Sets, For global configuration only

Operational IP Phone Features

Operational Features

Configuring Ring Tones and Tone Sets

		Use the following procedures to configure ring tones and tone sets on the IP		OperationalIP
		phones.
	Configuration Files
For specific parameters you can set in the configuration files for ring tones, see Appendix A, the section,
“Ring Tone and Tone Set Global Settings” on page A-77 or “Ring Tone Per-Line Settings” on page A-78.
				Phone
		IP Phone UI
2		Select Tones.
Step		Action
For global configuration only:
1		Press	on the phone to enter the Options List.
				Features
3		Select Set Ring Tone.
4		Select the type of ring tone (Tone 1 through Tone 5, or Silent).
		For 53i:
		Press Set.
		For 55i/57i/57i CT:
		Press Done.
5		Select Tone Set.
6		Select the country for which you want to apply the tone set.
		Valid values are Australia, Europe, France, Germany, Italy, UK, and US. Default is US.
		For 53i:
		Press Set.
		For 55i/57i/57i CT:
		Press Done.
		The ring tone and tone set you select is immediately applied to the IP phone.

41-001160-00, Rev 01 Release 2.0 5-151