Aastra Telecom C53I Select Primary Tftp, Select FTP Server, Select FTP Username, Select Http Path

IP Phone Administrator Guide Configuration Server Protocol

Configuring the IP Phones

IP Phone UI

Step Action

6From the Network Settings menu, select TFTP Server, FTP Server, HTTP Server, or HTTPS (depending on which protocol you configured in Step 4).

7Enter the IP address of the protocol server (in dotted decimal format).

Use the following table to configure the applicable server.

TFTP

-Select TFTP.

-Select Primary.

-Select Primary TFTP.

-Enter the IP address or qualified domain name of the primary TFTP server.

-Press Done to save the change.

Optional: You can also configure an alternate TFTP server if required. If Alternate TFTP is enabled, you must also enter an IP address or qualified domain name for the alternate TFTP server.

FTP

-Select FTP Server.

-Enter the IP address of the FTP server.

-Press Done.

Optional: You can enter a username and password for accessing the FTP server if required:

-Select FTP Username.

-Enter a username for accessing the FTP server.

-Press Done.

-Select FTP Password.

-Enter a password for accessing the FTP server.

-Press Done.

HTTP

-Select HTTP Server

-Enter the IP address of the HTTP server.

-Press Done.

-Select HTTP Path.

-Enter the HTTP sub-directory path name. If the IP phone’s files are located in a sub-directory beneath the server’s HTTP root directory, the relative path to that sub-directory should be entered in this field.

-Press Done.

4-14 41-001160-00, Rev 01 Release 2.0