Aastra Telecom 57I C53I manual XML Softkey URI, Example

Operational IP Phone Features

Operational Features

XML Softkey URI

In addition to specifying variables for the Action URIs, you can also specify variables in the XML softkey URIs that are bound when the key is pressed. These variables are the same as those used in the Action URIs.

When an administrator enters an XML softkey URI either via the Aastra Web UI or the configuration files, they can specify the following variables:

•$$SIPUSERNAME$$

•$$SIPAUTHNAME$$

•$$PROXYURL$$

•$$REMOTENUMBER$$

•$$DISPLAYNAME$$

•$$INCOMINGNAME$$

When the softkey is pressed, if the phone finds a URI configured with variables (in the form $$VARIABLENAME$$), they are replaced with the value of the appropriate variable. After all of the variables are bound, the softkey executes a GET on the URI.

Example

For example, if the administrator specifies an XML softkey with the value:

http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$

This softkey executes a GET on:

http://10.50.10.140/script.pl?name=42512

assuming that the sip username of the specific line is 42512.

You can configure the XML softkey URI variables via the configuration files or the Aastra Web UI.

Operational IP Phone Features

41-001160-00, Rev 01 Release 2.0 5-133