Aastra Telecom 57I C53I manual Softkey Settings for 55i, 57i, 57i CT

IP Phone Administrator Guide Hard Key Parameters

Appendix A

Softkey Settings for 55i, 57i, 57i CT

The value of "N" for the following parameters is dependent on the number of softkeys available on the55i, 57i, and 57i CT models. See the table above for applicable values.

Parameter –	Aastra Web UI	Operation->Softkeys and XML
softkeyN type	Configuration Files	aastra.cfg, <mac>.cfg
Type
(in Web UI)
Description	The type of softkey to configure. Valid types are:
	• none - Indicates softkey and/or programmable key is disabled.
	• line - Indicates softkey and/or programmable key is configured for
	line use.
	• speeddial - Indicates softkey and/or programmable key is configured
	for speeddial use. Speeddial is applicable to the 536EM and 560EM
	also.
	• do not disturb (dnd)- Indicates softkey and/or programmable key is
	configured for do not disturb on the phone. This option is "Do Not
	Disturb" in the Aastra Web UI).
	• blf - Indicates softkey and/or programmable key is configured for
	Busy Lamp Field (BLF) use. User can dial out on a BLF configured
	key. BLF is applicable to the 536EM and 560EM also.
	• list - Indicates softkey and/or programmable key is configured for
	BLF list use. (This option is BLF/List in the Aastra Web UI). User can
	dial out on a BLF List configured key.
	• xml - Indicates the softkey and/or programmable key is configured to
	accept an XML application for accessing customized XML services.
	You can also specify an XML softkey URL for this option.
	• flash - Indicates the softkey and/or programmable key is set to
	generate a flash event when it is pressed on the 57i and 57i CT, or a
	feature key is pressed on the 57i CT handset. The IP phone
	generates flash events only when a call is connected and there is an
	active RTP stream (for example, when the call is not on hold).
	• sprecode - Indicates the softkey and/or programmable key is
	configured to automatically activate specific services offered by the
	server. For example, if the sprecode value of *82 is configured, then
	by pressing the softkey, *82 automatically activates a service
	provided by the server.
	• park - Indicates the softkey and/or programmable key is configured to
	park incoming calls when pressed.
	• pickup - Indicates the softkey and/or programmable key is configured
	to pick up parked calls when pressed.
	• lcr - Indicates the softkey and/or programmable key is configured for
	“last call return” when pressed.

A-110 41-001160-00, Rev 01 Release 2.0