Aastra Telecom 57I C53I manual Type of Service ToS, Dscp

IP Phone Administrator Guide Administrator Level Options

Administrator Options

•NTP Time Servers

Enables or disables the time server. This parameter affects time server1, time server2, and time server3. Valid values are 0 (enable) and 1 (disable). Default is 1 (disable).

•Time Server 1, 2, and 3

The primary, secondary, and tertiary time server's IP address or qualified domain name. If the "NTP Time Server" parameter is enabled, and the primary and secondary time servers are not configured or cannot be accessed, the value for Time Server 3 is used to request the time.

•HTTPS Client Method

Defines the security method that the client advertises to the server during the Secure Socket Layer (SSL) handshake. Valid values are SSL 3.0 and TLS 1.0. Default is SSL 3.0.

•HTTPS Server - Redirect HTTP to HTTPS

Allows or disallows redirection from the HTTP server to the HTTPS server

•HTTPS Server - Block XML HTTP POSTs

Enables or disables the blocking of XML scripts from HTTP POSTs.

Type of Service (ToS), DSCP

Network settings also allows you to set Type of Service (ToS) and Differentiated Services Code Point (DSCP).

Reference

For more information about ToS and DSCP see Chapter 4, the section, “Type of Service (ToS), Quality of Service (QoS), and DiffServ QoS” on page 4-32.

VLAN

You can enable or disable VLAN and set specific VLAN IDs and priorities under Network Settings.

Reference

For more information about VLAN, see Chapter 4, the section, “Virtual LAN (optional)” on page 4-31.

3-14 41-001160-00, Rev 01 Release 2.0