Aastra Telecom 57I C53I manual Default Value For softkey type None, For softkey type Flash

Configuration Parameters

Hard Key Parameters

Parameter –	Aastra Web UI	Operation->Softkeys and XML
softkeyN states	Configuration Files	aastra.cfg, <mac>.cfg
Idle, Connected, Incoming,
Outgoing, Busy
(in Web UI)
Description	Displays the status of the phone when a softkey is pressed. You can
	enter multiple values (idle, connected, incoming, outgoing, busy) for
	the "softkeyN state" parameter.
	You must associate the softkeyN state parameter with a specific softkey.
	In the following example, the softkeyN states parameter is associated
	with softkey 12:
	softkey12 type: speeddial
	softkey12 label: voicemail
	softkey12 value *89
	softkey12 states: outgoing
	Note: The IP phone idle screen condenses the softkeys. So in the
	previous example, softkey 12 will appear in position 1 if no other softkeys
	are set. A softkey type of "empty" does not display on the idle screen at
	all.
Format	Text
Default Value	For softkey type - None:
	All states disabled
	For softkey types - Line, DND, speeddial, BLF, BLF List, XML, lcr,
	Directory, Callers List, Intercom, Services, empty:
	idle, connected, incoming, outgoing
	For softkey type - Flash:
	All states disabled
	For softkey type - Sprecode, Park:
	connected
	For softkey type - Pickup:
	idle, outgoing

Appendix A

41-001160-00, Rev 01 Release 2.0 A-115