Aastra Telecom 57I C53I manual Firmware Installation Information, Installation Considerations

IP Phone Administrator Guide Firmware Installation Information

Overview

Firmware Installation Information

Description

The firmware setup and installation for the IP phone can be done using any of the following:

•Phone keypad menu (Phone UI)

•Aastra Web-based user interface (Aastra Web UI)

When the IP phone is initialized for the first time, DHCP is enabled by default. Depending on the type of configuration server setup you may have, the IP phone may download a firmware version automatically, or you may need to download it manually.

Installation Considerations

The following considerations must be made before connecting the IP phone to the network:

•If you are planning on using dynamic IP addresses, make sure a DHCP server is enabled and running on your network.

•If you are not planning on using dynamic IP addresses, see Chapter 4, the section, “Configuring Network Settings Manually” on page 4-7for manually setting up an IP address.

To install the IP phone hardware and cabling, refer to the model-specific

SIP IP Phone Installation Guide.

1-4 41-001160-00, Rev 01 Release 2.0