Aastra Telecom 57I C53I manual Installing the Firmware/Configuration Files, Step Action

Overview

Firmware and Configuration Files

References

For setting up and configuring the IP phone using either the IP phone UI, the Aastra Web UI, or the configuration files, see Chapter 4, “Network Configuration of the IP Phones.”

For information about the softkey and programmable key parameters, see Appendix A, the section, “Softkey/Programmable Key/Feature Key Parameters” on page A-108.

Installing the Firmware/Configuration Files

The following procedure describes how to install the firmware and configuration files.

Overview

Step	Action
1	If DHCP is disabled, manually enter the configuration server’s IP address. For details on setting
	DHCP, see Chapter 4, the section “DHCP” on page 4-4.
2	Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP
	phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
	phone.
	Note: The <phone model> attribute is the IP phone model (i.e., 53i.st, 55i.st)
3	Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the
	configuration server.
	Note: The <mac> attribute represents the actual MAC address of your phone.
	(i.e., 00085D030996.cfg).
4	Note: Restart tthe IP phone as described in the section, “How to Restart the IP Phone” on page .

41-001160-00, Rev 01 Release 2.0 1-9