Aastra Telecom 57I C53I manual Setting Parameters in Configuration Files, Reference

IP Phone Administrator Guide

Setting Parameters in Configuration Files

Appendix A

Setting Parameters in Configuration Files

You can set specific configuration parameters in the configuration files for configuring you IP phone. The aastra.cfg and <mac>.cfg files are stored on the server. The aastra.cfg file stores global IP phone configuration settings. The <mac>.cfg file stores configuration settings specific to the IP phone with that MAC address. When you restart the IP phone, these files are downloaded to the phone.

If you make changes to the phone configuration, the changes are stored in a local configuration on the phone (not on the server).

Configuration changes made to the <mac>.cfg file override the configuration settings in the aastra.cfg file.

Reference

For information about configuration file precedence, see Chapter 1, the section, “Configuration File Precedence” on page 1-8.

This section includes the following types of configurable parameters:

•Operational, Basic, and Advanced Parameters on page A-5

•Hard Key Parameters on page A-106

•Softkey/Programmable Key/Feature Key Parameters on page A-108

•Advanced Operational Parameters on page A-134

•Troubleshooting Parameters on page A-138

A-4 41-001160-00, Rev 01 Release 2.0