Aastra Telecom 57I C53I manual Programmable Key Settings for 53i

Configuration Parameters

Hard Key Parameters

Programmable Key Settings for 53i and 55i

•The value of "N" for the following parameters is dependent on the number of programmable keys available on the 53i models. See the table on page 108 for the applicable values.

Parameter –	Aastra Web UI	Operation->Programmable Keys
prgkeyN type	Configuration Files	aastra.cfg, <mac>.cfg
Type
(in Web UI)
Description	The type of programmable key to configure. Valid types are:
	• none - Indicates no setting for programmable key.
	• line - Indicates programmable key is configured for line use.
	• speeddial - Indicates programmable key is configured for speeddial
	use
	• dnd - Indicates programmable key is configured for do not disturb
	on the phone. This option is "do not disturb" in the Aastra Web UI).
	• blf - Indicates programmable key is configured for Busy Lamp Field
	(BLF) use. User can dial out on a BLF configured key.
	• list - Indicates programmable key is configured for BLF list use.
	User can dial out on a BLF List configured key.
	• xml - Indicates programmable key is configured to accept an XML
	application for accessing customized XML services. You can also
	specify an XML softkey URL for this option.
	• flash - Indicates programmable key is set to generate a flash event
	when it is pressed on the 53i. The IP phone generates flash events
	only when a call is connected and there is an active RTP stream (for
	example, when the call is not on hold).
	• sprecode - Indicates programmable key is configured to
	automatically activate specific services offered by the server. For
	example, if the sprecode value of *82 is configured, then by
	pressing the softkey, *82 automatically activates a service provided
	by the server.
	• park - Indicates programmable key is configured to park incoming
	calls when pressed.
	• pickup - Indicates programmable key is configured to pick up
	parked calls when pressed.
	• lcr - Indicates programmable key is configured for “last call return”
	when pressed.
	• directory - Indicates programmable key is configured to access the
	Directory List.
	• callers list - Indicates programmable key is configured to access
	the Callers List.
	• conference - Indicates programmable key is configured as a
	conference key. Enter as “conf” in configuration files.
	• transfer - Indicates programmable key is configured as a Transfer
	key for transferring calls. Enter as “xfer” in configuration files.
Format	Text

Appendix A

41-001160-00, Rev 01 Release 2.0 A-117