Aastra Telecom 57I C53I manual Installation Requirements

Overview

Firmware Installation Information

Installation Requirements

The following are general requirements for setting up and using your SIP IP phone:

•A SIP-based IP PBX system or network installed and running with a number created for the new IP phone.

•Adherence to SIP standard RFC 3261.

•Access to a configuration server where you can store the firmware image and configuration files.

•The IP phone must be configured for a specific type of protocol to use. TFTP is enabled by default. You can configure the following protocols on the IP phone:

—TFTP (Trivial File Transfer Protocol)

—FTP (File Transfer Protocol)

—HTTP (Hypertext Transfer Protocol)

—HTTPS (Hypertext Transfer Protocol over Secure Socket Layer)

Note: If you set TFTP, the configuration server must be able to accept connections anonymously.

•A 802.3af Ethernet/Fast Ethernet LAN

•Category 5/5e straight through cabling

•Power over Ethernet (PoE) inline power injector (optional accessory – necessary only if your network provides no inline power and if you do not use the IP Phone’s power adapter).

•Power adapter (included for models 53i, 55i, and 57i, and 57i CT).

•Service provider must support 55i SIP IP phone.

Overview

41-001160-00, Rev 01 Release 2.0 1-5