Aastra Telecom 57I C53I manual Click on Operation-Reset

Operational IP Phone Features

IP Phone Administrator Guide

Operational Features

Aastra Web UI

2For softkeys, in the "Type" field, select the type of softkey you want to configure.

For programmable keys, in the “Hard Key” field, select the hard key type you want to configure.

Reference: For available type values on each IP phone model, see Appendix A, the section, “Softkey/Programmable Key/Feature Key Parameters” on page A-108.

3	For softkeys, If applicable, enter a label in the “Label” field.
4	In the "Value" field, enter a value to associate with the softkey or programmable key. For example, for
	a speeddial value, you can enter *1.
5	In the "Line" field, select the line for which you want to associate the softkey or programmable key.
6	The operational states display to the IP phone when a softkey is used. To disable an operational
	state, click the "Idle", "Connected", "Incoming", or "Outgoing" fields to uncheck the box.
7	Click	to save your changes.
8	Click on Operation->Reset.
9	In the "Restart Phone" field click		to restart the IP phone.

5-30 41-001160-00, Rev 01 Release 2.0