Aastra Telecom C53I manual Dscp Range/VLAN Priority, Configuring Type of Service ToS/DSCP optional

IP Phone Administrator Guide Advanced Network Settings

Configuring the IP Phones

DSCP Range/VLAN Priority

DSCP	VLAN Priority
Range
0-7	0
8-15	1
16-23	2
24-31	3
32-39	4
40-47	5
48-55	6
56-63	7

The following table identifies the default DSCP of protocols.

Protocol	Default DSCP
Name	Values in the
	ToS Field
rtp	32
rtcp	32
sip	24

Configuring Type of Service (ToS)/DSCP (optional)

Use the following procedures to configure ToS/DSCP on the IP phone.

Note: ToS/DSCP is enabled by default. The SIP, RTP, and RTCP parameters show defaults of 24, 32, and 32, respectively. Use the following procedures to change these settings if required.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Type of Service (ToS)/DSCP Settings” on page A-27.

4-34 41-001160-00, Rev 01 Release 2.0