Aastra Telecom 57I C53I Model 53i Examples, Programmable Configuration Using the Aastra Web UI

Operational IP Phone Features

Operational Features

Model 53i Examples

Server	Park Configuration	Pickup Configuration
Asterisk	prgkeyN type: park	prgkeyN type: pickup
	prgkeyN value: asterisk;70	prgkeyN value: asterisk;70
	prgkeyN line: 1	prgkeyN line: 1
Sylantro	prgkeyN type: park	prgkeyN type: pickup
	prgkeyN value: sylantro;*98	prgkeyN value: sylantro;*99
	prgkeyN line: 1	prgkeyN line: 1
BroadWorks	prgkeyN type: park	prgkeyN type: pickup
	prgkeyN value: broadworks;*68	prgkeyN value: broadworks;*88
	prgkeyN line: 1	prgkeyN line: 1
ININ PBX	prgkeyN type: park	prgkeyN type: pickup
	prgkeyN value: inin;callpark	prgkeyN value: inin;pickup
	prgkeyN line: 1	prgkeyN line: 1

Note: The 53i does not allow for the configuration of labels and states.

Use the following procedure to configure the Park/Pickup call feature using the programmable configuration method and the configuration files.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section,

“Softkey Settings for 55i, 57i, 57i CT” on page A-110 and “Programmable Key Settings for 53i and 55i” on page A-117.

Programmable Configuration Using the Aastra Web UI

On the 57i/57i CT, you configure a Park and/or Pickup key at Operation->Softkeys and XML. You enter a key label, and value for a specific line on the phone. The default state of the Park configuration is "connected". The default state of the Pickup configuration is "idle, outgoing".

The 57i CT handsets use the park/pickup configuration enabled at Operation->Handset Keys in the Aastra Web UI. If Park or Pickup are enabled on more than one line on the base unit, the 57i handset uses the first programmable configuration.

Operational IP Phone Features

41-001160-00, Rev 01 Release 2.0 5-79