Aastra Telecom 57I C53I manual Using the NoOp Command

IP Phone Administrator Guide How to Create an XML Application

Appendix G

The following example shows an AastraIPPhoneExecute object using the Reset command:

<AastraIPPhoneExecute>

<ExecuteItem URI="Command: Reset"/> </AastraIPPhoneExecute>

Note: If you specify a command as a URI attribute (instead of a URL), the keyword "Command" must be prepended in the value of the URI attribute so that the phone recognizes it as a URI attribute value. If you enter a URI and leave out the “Command” keyword, the phone interprets the value in the URI attribute as a URL containing network resources.

The following example shows the AastraIPPhoneExecute object using a URL:

<AastraIPPhoneExecute>

<ExecuteItem URI="http://aastraserver/message.xml"/> </AastraIPPhoneExecute>

When the phone receives this object, it displays the specified XML URI page.

Using the NoOp Command

You can use the AastraIPPhoneExecute object as an object to create a blank display (it has no affect on the IP phone). It is made up of a blank URI. You can use this feature when you need to press a key on the phone to access a feature, and it is not necessary to display anything. You can also use the AastraIPPhoneExecute object and this command with other objects in an XML script.

The following example shows an AastraIPPhoneExecute object using a blank URI:

<AastraIPPhoneExecute> <ExecuteItem URI=””/>

<AastraIPPhoneExecute>

G-26 41-001160-00, Rev 01 Release 2.0