IP Phone Administrator Guide Troubleshooting Solutions

Troubleshooting

Reason:

Neither of the <mac>.tuz and aastra.tuz files are present on the configuration server (TFTP/FTP/HTTP).

Fix:

Create the encrypted files using anacrypt.exe and copy them to the configuration server.

Reason:

The encrypted <mac>.tuz or aastra.tuz file is encrypted using a different version of anacrypt.exe than the phone firmware.

Fix:

Run "anacrypt.exe -v" and confirm that the correct version is reported, compared to the phone firmware version.

Why is my phone not receiving the TFTP IP address from the DHCP Server?

For DHCP to automatically populate the IP address or qualified domain name for the TFTP server, your DHCP server must support Option 66. Option 66 is responsible for forwarding the TFTP server IP address or domain name to the phone automatically. If your DHCP server does not support Option 66, you must manually enter the IP address or qualified domain name for the TFTP server into your IP phone configuration.

For procedures on configuring the TFTP server using the IP phone UI and the Aastra Web UI, see Chapter 4, the section, “Configuring the Configuration Server Protocol” on page 4-13.

For specific protocol parameters you can set in the configuration files, see Appendix A, the section, “Configuration Server Settings” on page A-11.

9-10

41-001160-00, Rev 01 Release 2.0

Page 334
Image 334
Aastra Telecom 57I C53I manual Troubleshooting